6. Set the frequency generation direction (descending or ascending)
7. Set the repeat or shutdown timer to suit your needs.
8. Start the generator by confirming "Spust generator" on the same screen
as "Program 1"
2
How to run 5 programs:
1. Enter the "Generator Frequency"
2. Select "Program 1" and select the desired program.
3. If no program meets your requirements, set the desired initial and final
frequency manually using the "Start" and "Stop"
4. Set "Unit start" and "Unit stop" to order, Hz, or kHz, according to your
request for initial and final frequency.
5. Set the length of the program using "Length".
6. Repeat steps 2 through 5 for other programs.
7. Set the frequency generation direction (descending or ascending)
8. Set the repeat or shutdown timer to suit your needs.
9. Start the generator by confirming "Spust generator" on the same screen
as "Program 1"
3
Generator settings for use with application coil
The application coil is a coil designed to apply a locally homogeneous magnetic
field for stimulation. This is not the standard antenna supplied with the device.
For more information on this accessory, please contact your distributor.
Activating of the generator for the application coil is to switch the "Application
Cylinder" item in the frequency generator menu to YES. Do not turn this option
on if you are not using the application coil.
For application coil, the frequencies are primarily 0 - 100Hz.
Language setting
The "Language" item in the configuration menu allows you to select the
language of the labels in the main view and menu items.