Loopcomm LP-7665 Page 35 User Manual Download | Manualshive

Page: 35 / 55

background image

Device Password ID: Indicates the method or identifies the specific password that
the selected Registrar intends to use. The AP in PBC mode must indicate0x0004
within the two-minute Walk Time.

Value Description

0x0000                  Default(PIN)
0x0001                  User-specified
0x0002                  Rekey
0x0003                  Display
0x0004                  Push Button (PBC)
0x0005                  Registrar-specified
0x0006-0x000F    Reserved

Selected Registrar: Indicates if the user has recently activated a Registrar to add an
Enrollee. The values are "TRUE" and "FALSE".
State: The current configuration state of the AP. The values are "Unconfigured" and
"Configured".
Version: The specified WPS version.
AP Setup Locked: Indicates if the AP has entered a locked setup state.
UUID-E: The universally unique identifier (UUID) element generated by the
Enrollee. The value is 16 bytes.
RF Bands: Indicates all of the RF bands available to the AP. A dual-band AP must
provide it. The values are "2.4GHz" and "5GHz".

4.2.7.3 Example to Add to Registrar Using PIN Method

The user obtains a device password (PIN Code) from the STA and enters the password into the
Registrar. Both the Enrollee and the Registrar use PIN Config method for the configuration setup. The
following image outlines the process.

Select "Enrollee" from the Config Mode drop-down list.

35

«
...
33
34
35
36
37
...
»

Summary of Contents for LP-7665
























































Reviews:

No comments

Related manuals for LP-7665

Brand: C-Media Pages: 33

Brand: Hamlet Pages: 4

Brand: Gigabyte Pages: 44

8-out Video/Sync Output Cards VM2144VS

Brand: Altinex Pages: 13

Brand: FastVDO Pages: 16

MiCard PLUS-2 V2

Brand: UniFlow Pages: 22

Brand: XPR Access Pages: 20

Brand: C Prox Pages: 7

Brand: IDTECH Pages: 8

Brand: Creative Pages: 53

Brand: ADLINK Technology Pages: 32

Brand: ADLINK Technology Pages: 228

SmartTouch Swipe

Brand: Embed Pages: 14

Brand: SeaLevel Pages: 21

FastTrak TX4310

Brand: Promise Technology Pages: 134

Brand: baiMobile Pages: 33

Brand: Inventa Australia Pty Ltd Pages: 15

VREngine/SMD2-PCI

Brand: RealVision Pages: 54

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands