9
Loop-ACC-Y-2SCSI-
2T50P8-16E75-
G
1u 16-port Y-box panel for two SCSI (E1(120
ohm)) to two TELCO 50 (E1(75 ohm))
connectors (8 ports per TELCO connector)
without cable
Using with Loop-O9500-R-16TE-
G
Loop-ACC-Y-2SCSI-
2T50P12-16E75-
G
1u 16-port Y-box panel for two SCSI (E1(120
ohm)) to two TELCO 50 (E1(75
ohm))connectors (12 ports to the first TELCO
connector, 4 ports to the second TELCO)
straight without cable
Using with Loop-O9500-R-32TE-
G,
Loop-O9500-R-63TE-
G
Loop-ACC-Y-2SCSI-
1T64P16-16E75-
G
1u 16-port Y-box panel for two SCSI (E1(120
ohm)) to one TELCO 64 (E1(75
ohm))connectors (16 ports per TELCO
connector) straight without cable
Using with
Loop-O9500-R-16TE-
G
Loop-ACC-Y-4SCSI-
4T50P8-32E75-
G
1u 32-port Y-box panel for four SCSI (E1(120
ohm)) to four TELCO 50 (E1(75
ohm))connectors (8 ports per TELCO
connector) without cable
Using with Loop-O9500-R-16TE-
G
Loop-ACC-Y-4SCSI-
3T50P12-32E75-
G
1u 32-port Y-box panel for four SCSI (E1(120
ohm)) to three TELCO 50 (E1(75
ohm))connectors (12 ports to the first TELCO
connector, 12 ports to the second TELCO
connector and 8 ports to the third TELCO
connector) without cable
Using for Loop-O9500-R-32TE-
G,
Loop-O9500-R-63TE-
G
Loop-ACC-Y-4SCSI-
2T64P16-32E75-
G
1u 32-port Y-box panel for four SCSI(E1(120
ohm)) to two TELCO 64 (E1(75
ohm))connectors (16 ports per TELCO
connector) without cable
Using with Loop-O9500-R-32TE-
G,
Loop-O9500-R-63TE-
G
Y-Box(All Y-Box are RoHS compliant)
Loop-VV-B-
G
1 for 1 protection Y-Box with BNC connectors
(4-E1)
Used with 4E1
Loop-VV-R-
G
1 for 1 protection Y-Box with RJ48C connectors
(16-E1)
Used with 4E1
Loop-VV-T-
G
1 for 1 protection Y-Box with RJ48C connectors
(16-T1)
Used with 4T1
Conversion Cables(All conversion cables are RoHS compliant)
Loop-ACC-CAB-SCSI68M-
200-1SCSI68M-
G
SCSI 68 pin/Male to SCSI 68 pin/Male
Extension Cable Length:200cm
Used in
Loop-O9500-R Y-box panels and
conversion panels
Loop-ACC-CAB-DB44M-
100-2DB25F-1DB09F-DB
DSUB-44 pin/Male to two DSUB-25 pin/Female-
one DSBU-9 pin/Female
Length 100cm
Used in Loop-O9500-R-8RS232-DB-
G
plug-in card
Loop-ACC-CAB-DB25M-30-
1M34F
DSUB-25pin/Male to M34/Female V.35
Conversion cable
Length: 30 cm
Used in Loop-O9500-R-6V35A-
G
plug-in card
Loop-ACC-CAB-DB25M-30-
1DB37F
DSUB-25pin/Male to DSUB-37/Female RS449
Conversion cable Length: 30 cm
Used in Loop-O9500-R-6V36A-
G
and
Loop-O9500-R-6R449A-
G
plug-in
cards
Blank Panels
30.001397.A00LF
Blank panel for CPU slot
30.001076.A00LF
Blank panel for power supply slots
Same as that used on O9400R.
30.001077.A00LF
Blank panel for High-speed slots (Slots 1~4)
Same as that used on O9400R.
30.001027.A00LF
Blank Panel for Low-speed slots (Slots 11~16)
Same as that used on AM-3440-CHA.
For 4E1 card
Where
cc
is used to select connector:
cc
=
Description
Note
RJ
RJ48C connector
BNC
BNC connector
For 12/24-channel FXS card:
Where
sn
is used to select special function. If this option is not required, omit the
sn
field in the ordering code.
sn
=
Description
Note
S1
FXS Loop Feed = -48 Vdc with 35 mA current limit
S4
Remove alarm tone
S5
Double ring tone transmit