Look Solutions Tiny FX Operating Manual Download Page 8

8

5.1 Selecting the Location

The location for the 

Tiny FX

 must

•  be dry 
•  guarantee sufficient air supply
•  have sufficient distance (at least 3 ft) from inflammable materials 
•  have very little vibration
•  have an ambient operating temperature between 40° F and 115° F 
•  have a relative air humidity of less than 80%. 

5. Operating the Tiny F07

4. Fluid

The 

Tiny FX

 is built to be used with original Look Tiny-Fluid. Use of other liquids will 

clog the vaporizer and void the warranty.

4.1 General

The  fluid  reservoir  can  be  refilled  using  the  delivered  refilling  set  [12].  Thus,  the 

reservoirs can be used several times.

a)  Mount 5 ml of Tiny-Fluid from the original fluid bottle with the refilling set.

b) Connect the adaptor of the refilling set with the reservoir you would like to refill. 

c)  Disconnect the adaptor and screw the refilled reservoir into the 

Tiny FX

. If you refill 

reservoirs for stock, please use the covers to avoid small bits of dirt inside the reservoir 
and make sure the reservoir cannot leak.

4.2 Refilling the fluid reservoir

Summary of Contents for Tiny FX





















Reviews: