Hardware Setup
13
2011/01/07
Version:
2.2
Prepare nippers to change the position of the jumpers from Ring-IN to +5V or +12V as the picture
shown below.
2.2b Compact Flash Installation……
Package Content
A Compact Flash (CF) card
Installing a CF Card
1.
Turn off the system power.
2.
Turn over the GFT-150, the CF Card socket is found under the case.
3.
Unscrew the metal piece and take it off.
4.
Plug-in the CF Card.
5.
Replace the metal piece and retighten the screw.
6.
You may turn the system back on once the CF card is completely installed.
