Introduction
9
2011/01/07
Version:
2.2
1.4 Connector Panels
The connector panel is located at the bottom of the main unit base. To clearly see the panel you
must open the base cover.
Chart of the connector panel:
I/O Port
Connector Type
Description
PS/2
Mouse
PS/2 Mouse
Connector
Use this port for an external mouse.
PS/2
Keyboard
PS/2 Keyboard
Connector
Use this port for an external keyboard.
COM 3
COM 4
COM 5
COM 6
DSUB Connector
The serial ports COM3/COM4/ COM5/ COM6 can be
used to connect serial devices such as VFD customer
display or printer.
LPT DSUB
Connector
The
parallel
port
LPT can be used to connect parallel
devices, such as a printer.
RJ12
RJ12 Cable
The port is used to hook this device to a cash drawer.
VGA
VGA Connector
The VGA port is for the external LCD or CRT monitor.
RJ45 10/100/1000Mbps
Ethernet
The LAN port is used to hook this device to a local area
network.
USB
USB
The USB (Universal Serial Bus) port can be used to
connect USB devices.
USB34
USB
The USB (Universal Serial Bus) port can be used to
connect USB devices.
Audio
Speaker Cable
After install onboard audio driver, you may connect
speaker to Line Out jack, microphone to Mic In jack.
Power
Connector
DC 12V IN
power connector
The power connector mainly supplies power to the
machine. Caution! If the DC 12V power connector is not
connected, the system will not start.
Power
Connector
DC 12V OUT
power connector
The power connector mainly supplies power to the second
monitor. (Optional)
