manualshive.com logo in svg

Longshine LCS-WRM-3214, User Manual, Page: 32 / 91

Share
Download
Longshine LCS-WRM-3214 User Manual Download Page 32

 

31

TR-069 

TR-069 is CPE Management Protocol from WAN side, intended for communication 

between a CPE and Auto-Configuration Server (ACS). The CPE WAN Management 

Protocol defines a mechanism that encompasses secure auto-configuration of a CPE, 

and also incorporates other CPE management functions into a common framework. 

The CPE WAN Management Protocol is intended to support a variety of functionalities 

to manage a collection of CPE, including the following primary capabilities: 

•Auto-configuration and dynamic service provisioning 

•Software/firmware image management 

•Status and performance monitoring 

•Diagnostic 

 

ACS URL: 

URL of the auto configuration server (ACS) provided by the ISP.

   

Periodic Inform Enabled: 

Enable/disables the RG to connect to the ACS periodically. 

If you enable this feature, you should enter a value in the Periodic Inform Interval 

field.

   

Periodic Inform Interval: 

This field is enabled only when the Periodic Inform Enabled 

field is checked. It defines the amount of time (in seconds) between a successful 

connection with an ACS server and a new attempt to connect to an ACS server. A 

recommended value is 86400 seconds (1 day).

   

ACS Connect: 

By clicking the ACS Connect button, you manually connect the RG to 

the ACS.

   

Click

 Apply 

to complete the setup. Click 

Save All

 to save the changes.

 

 

Summary of Contents for LCS-WRM-3214




























































































Reviews:

No comments