25
Bridge Settings
1. At
the
Setup
main page, click
New Connection
.
2. At
the
Type
field select
Bridge
.
3. Enter a unique name for the Bridged connection in the
Name
field. The name
must not have spaces and cannot begin with numbers.
4. In
the
Bridge Settings
section, select the
Encapsulation Type
(LLC or VC).
Note—
If you are not sure, just use the default mode.
5. In
the
PVC Settings
section, enter values for the
VPI
and
VCI
.
Note—
Your DSL service provider or your ISP supplies these values.
6. Select
the
Quality of Service
(QoS). Leave the default value if you are unsure or
if the ISP did not provide this information.
The
PCR
,
SCR
,
MBS
, and
CDVT
fields are enabled / disabled depending on the
QoS
selection. Enter the values provided by the ISP or leave the defaults.
7.
Click
Apply
to complete the connection setup.