24
DHCP Settings
1. At
the
Setup
main page, click
New Connection
.
2. At
the
Type
field select
DHCP
.
3. Enter a unique name for the DHCP connection in the
Name
field.
The name must not have spaces and cannot begin with numbers.
4. The
Network Address Translation
(NAT) and the
Firewall
options are enabled
by default. Leave these in the default mode.
5. If your DSL line is connected and your DSL/IPS provider is supporting DHCP, you
can click
Renew
and the gateway retrieves an IP Address, Subnet Mask, and
Gateway Address. At any time, you can release the DHCP address by clicking
Release
, and renew the DHCP address by clicking
Renew
.
6. Under
PVC Settings
, enter values for the
VPI
and
VCI
.
Note—
Your DSL service provider or your ISP supplies these values.
7. Select
the
Quality of Service
(QoS). Leave the default value if you are unsure or
if the ISP did not provide this information.
The
PCR
,
SCR
,
MBS
, and
CDVT
fields are enabled / disabled depending on the
QoS
selection. Enter the values provided by the ISP or leave the defaults.
8.
Click
Apply
to complete the connection setup.