7
z
Supports Configuration upgrade and backup
z
Full Range of Internal universal switching power supply
z
Supports Reset to factory default button
1.3 The Front Panel
The following figure shows the front panel of the switch.
LEDs Definition
This device provides extensive LEDs to show the activities on power, system and ports.
See the following description for your reference:
LED
Status
Operation
POWER
Steady Green
The switch is powered on.
Off
The switch is powered off.
SYSTEM
Steady Green
The switch is on and functioning properly
Blinking Green The switch is rebooting and performing self-diagnostic tests.
Off
The power is off or the system is not ready/malfunctioning.
Link/ACT
Steady Green
Valid port connection;.
Blinking Green Valid port connection and there is data transmitting/receiving
Off Port
disconnected.
The Reset Button
Reset the switch to its factory default configuration via the RESET button. Press the RESET button
for five seconds more and release. The switch automatically reboots and reloads its factory
configuration file. Press the RESET button for two seconds and release, the switch will warm boot
for hardware reset. The RESET button is on the front panel of the switch.
Console Port
This port is reserved for command-line interface (CLI) and RS232 firmware upgrade to use.
