41
6.1.3.7 QoS Commands
Commands at QoS level:
QoS Configuration [<portlist>]
QoS TosPrecedence [<portlist>] [<tosprecedencelist>] [low|high]
QoS Shaper [<portlist>] [enable|disable] [<rate>]
QoS Policer [<portlist>] [enable|disable] [<rate>]
QoS Storm Control [<portlist>] [enable|disable] [<rate>]
1. QoS Configuration
Syntax:
QoS Configuration [<portlist>]
Description:
Show the configured IP ToS Precedence priority mapping, shaper
configuration, policer configuration and multicast storm control
[<portlist>]: Port list (default: All ports).
2. QoS Tosprecedence
Syntax:
QoS Tosprecedence [<portlist>] [<tosprecedencelist>] [low|high]
Description:
Set or show the IP ToS precendence priority mapping.
[<portlist>] : Port list (default: All ports).
[<tosprecedencelist>]: IP ToS precedence list, 0-7 (default: All precedence values).
[low|high] : Internal priority (default: Show priority).
3. QoS Shaper
Syntax:
QoS Shaper [<portlist>] [enable|disable] [<rate>]
Description:
Set or show the shaper configuration.
[<portlist>] : Port list (default: All ports).
[enable|disable]: Enable/disable shaper (default: Show shaper mode).
[<rate>] : Leaky bucket rate in Kbit/s [250-1000000k] or Mbit/s[1-1000m] (default: Show shaper
rate).
4. QoS Policer
Syntax:
QoS Policer [<portlist>] [enable|disable] [<rate>]
Description:
Set or show the policer configuration.
[<portlist>] : Port list (default: All ports).
[enable|disable]: Enable/disable policer (default: Show policer mode).
[<rate>] : Leaky bucket rate in Kbit/s [250-1000000k] or Mbit/s [1-1000m] (default: Show policer
rate).
