LRF-3000P Ultrasonic flowmeter
- 11 -
Chapter IV Operation Panel and Quick Start
4.1 Power on
Warning!
Please check the meter is correctly installed or not before power on, including:
Connecting the power supply as specified;
Please check the electrical connection of the supply power is correct or not.
4.2 Boot screen
The flowmeter is composed of the measuring transducer and the signal converter. And the delivery product is
ready for putting into use. All operating parameters and settings have been set according to your order
requirements.
(1) Boot screen
In normal display, press [ ] and [ ] keys to switch among NET Total, POS Total and NEG Total.
Go on pressing [ ] to enter M01 menu to display the flow rate, total flow and transient flow. The following
shows how to switch between the flow rate and the total flow.
Prompts!
"*R" indicates that the flowmeter is running normally; “D” indicates that the flowmeter is carrying out gain
setting; “E” indicates that the flowmeter can’t receive any ultrasound signals.
Flow Total
Flow Total
POS
NET
Net
POS
NET
NET
Flow Rate
Flow Rate
