Please note: Check photo below, when install back the one-way valve, only a little bit tight
will be ok, please do not make it too tightly, if too tightly, the air could not get through, so
the machine could not start up,
6. How to discharge the residual chemicals in the chemicals tank
Use screw driver loose the Bolt as Picture A, B shows, let the residual chemicals go
out.
A B
Note:
After finishing discharging the chemicals, please install the bolt back without
missing the O-ring.
7. After start up machine, do not spray fog.
7.1
Make sure
turn on the chemical valve
,
the adjustable flow rate valve
is also turn on.
Bolt
O
‐
Ring
