3
General Information
3.1 Modules identification
Three labels on the module contain the information below:
1. Nameplate: product type, rated power, rated current, rated voltage, open circuit voltage, short circuit current under testing
conditions, certification indicator, maximum system voltage, etc.
2. Current classification label: Rated working current.(H indicates High, M indicates Medium, L indicates Low)
3. Serial Number label: A unique serial number which is laminated inside the module permanently which can be found in the
front of the module. There is another same serial number beside the module nameplate.
6
1
2
3
4
5
04
Figure 1 Typical Mechanical Drawing of Mono-facial Modules
(
Please refer to section 3.2 for the location of the junction box. The specific version is subject to the corresponding specification.
)
1 Frame
2 Glass
3 EVA
4 Solar Cell
5 Backsheet
6 Silica Gel
7 Junction Box
8 Name Plate
9 Cable
10 Connector
11 Mounting Hole
12 Grounding Hole
13 Drain Hole
14 Bar Code
12
7
10
10
8
9
9
14
13
11
