TigWeld 200EX 200amp AC/DC
TIG Welder
~ 12 ~
Operation
Layout for the panel
1
Positive Welding Terminal:
Positive polarity output. It is important that the plug be inserted and
secured.
2
8 pin Control Socket:
Is used to connect either to the trigger switch on the TIG torch, or to the
foot pedal
3
Negative Welding Terminal:
Negative polarity output. It is important that the plug be inserted
and secured.
4
Shielding gas connector:
Is connected to the gas input pipe of torch
.
5
Power source switch:
Switch to “ON”, the welder is turned on, while switch to “OFF”, the
welder is turned off.
6
Power source input:
To connect to a 220v power source.
7
Shield gas input joint:
Gas inlet for shielding gas
8
Fan:
Is used for cooling the components and parts inside the welder.
