1
F 1
F 5
F 4
F 3
S 1
S 2
S 3
2
F 2
Introduction
TS series products are controllers of four channels and multi-function
syringe pumps. They need to be connected with drive units to constitute
syringe pump systems of strong functions and easy-to-operate. They are
widely used in biological laboratory. There are 3 types:
Controller Type
T S - 1 A
T S - 2 A
T S - 1 B
Drive Unit Type
L 0 1 0 7 - 1 A
L 0 1 0 7 - A
W 0 1 0 9 - 1 B
2
Working Mode
Infusion-only
Infusion/Withdrawal
Infusion/Withdrawal
S1 Controller
S2 Drive Unit
S3 Glass Syringe
Note:
Controller and drive unit are connected through 8 pin S terminal.
Be careful when insertion or extraction. Please see page 21 for
detail information about
control function.
External
F1 Power Switch
F2 Power Socket
F3 Drive Unit Socket
F4 External Control Input and Communication Interface
F5 External Control Output Interface
Operation Panel
SYRINGE PUMP OPERATING MANUAL
SYRINGE PUMP OPERATING MANUAL
Fast Forward Key
Exit Key
Channels Switch Key
Fast Reverse Key
Start/Stop Key
Rotary Coded Switch
Basic Operation
Start/Stop Key
Press the Start/Stop Key to start or stop the pump. In multi-
channel working mode, to pause the running state, the pump will
prompt if continue the current working state.
Fast Forward Key
In multi-channel working mode, pressing the Fast Forward Key all
the enabling channels infuse at the max. speed. In single channel
working mode, pressing the Fast Forward Key this channel infuses
at the max. speed. Loose this key the pump stops. Other keys are
invalid when pressing this key.
Fast Reverse Key
In multi-channel working mode, pressing the Fast Reverse Key all
the enabling channels withdraw at the max. speed. In single
channel working mode, pressing the Fast Reverse Key this channel
withdraws at the max. speed. Loose this key the pump stops. Other
keys are invalid when pressing this key.
Note: Fast Forward Key and Fast Reverse Key are invalid when the
pump is in running state.
Rotary Coded Switch (RCS)
Turn the Rotary Coded Switch for menu selection or parameter
setting. Press the Rotary Coded Switch for confirmation.
Note: Put the finger in the center of the switch to press the RCS.
Put the finger on the small concave which is on the side of the
switch to turn the RCS.
Channels Switch Key
Switch between different channels.
Exit Key
Cancel current operation and return to previous menu.
