Note:
Select “Yes” to save the
current setting
Select “No” not to save
the setting
Select “Cancel” to return
to
previous
menu
and
keep on selecting
a.Display mode: Display the current volume, flow rates or speed.
Please see page 16 “Display Select” for setting method.
b.Time:
Required
time
for
one
time
infusing
or
withdrawal.
Counting down when running.
c. Syringe: Display selected syringe.
d.Start/Stop state: Start displays
Stop displays
Pause
displays
e. Copy number: Display dispensing copy number. Counting down
when running (no display in “continuous” mode).
f. Working mode: Display current working mode. Display
in
“infusion, withdrawal, infusion/withdrawal, withdrawal/infusion”
modes. Display
in “continuous” mode.
g.Direction: Display running direction. Infusion displays
.
Withdrawal displays
.
;
;
.
8
7
Volume Display
b .
c .
d .
e .
g .
a .
f .
Flow Rate Display
Speed Display
1 #：
6 . 7 1 5 m m / m i n
8 . 3 s e c
1 0
1 #：
2 2 4 . 0 n L / s e c
8 . 3 s e c
1 0
Single Channel Functions Setting
5 functions are set:
Working Mode Selection
8 . 3 s e c
1 0
Continuous
Display Select
Note: TS-1A controller disables Mode Select. It only has infusion
working mode.
Three Display Modes for Single
Channel Running Interface:
SYRINGE PUMP OPERATING MANUAL
SYRINGE PUMP OPERATING MANUAL
Press the
RCS
Press the
Exit Key
Press the
Exit Key
Press the
RCS
Press the
Exit Key
Press the
RCS
Press the
RCS
Select “Yes”
or “No”
Turn the
RCS
Turn the
RCS
Select
“Cancel”
Please see page 16 “Display
Select” for “Speed” and
“Flow” display.
Please see page 16 “Display
Select” for “Speed” and
“Flow” display.
Turn the RCS to select
if save the change
Turn the RCS to
select working mode
Turn the RCS to
select working mode
Prompts
Infusion: The pump infuses during the whole working course
Withdrawal: The pump withdraws during the whole working course
Infusion/Withdrawal: The pump infuses first and then withdraws during the
whole working course
Withdrawal/Infusion: The pump withdraws first and then infuses during the
whole working course
Continuous: The pump infuses first and then withdraws, and then cycles
continuously
Please see page 11 “Dispensing Parameters Setting” to set the parameters for
above working modes.
Save change?
Yes
o
Cancel
N
8 . 3 s e c
1 0
Syringe
： 1 0 0 L
μ
1#
1.860 L
V
ol
：
μ
Syringe
： 1 0 0 L
μ
Syringe
： 1 0 0 L
μ
8 . 3 s e c
1 0
Syringe
： 1 0 0 L
μ
1#
1.860 L
V
ol
：
μ
Mode Select
yringe Select
Dispense Para
Calibration
S
Mode Select
yringe Select
Dispense Para
Calibration
S
Infusion
Withdrawal
I/W
W/I
Syringe
： 1 0 0 L
μ
1#
1.860 L
V
ol
：
μ
Turn the RCS to select
working mode
