Changzhou Longer Electronics Co.,Ltd
Address:Fl.4, No.431‐1,Gongrenxincun,Changzhou,Jiangsu, P.R.China
Website: www.cldic.com Email: [email protected],[email protected]
CLR7992 LONGER URC User Manual(Preliminary)
2015-7-8
6
/
8
the device power off again, go to step (5), otherwise, go to step (6).
(6)
Press
button to exit the search mode, or exit automatically without key pressing in 20 seconds.
5.4 6 URC codes updatable
Once some often‐used codes are not included inside URC, at most 6pcs URC codes may be amended from PC
software and smart phone App by USB/IR programming or audio port programming.
6 updatable code numbers are 5001‐5006.
5.5 URC code number checking(Display the Active Code)
(1)
Keep keys
and
pressed down until the LED stays lit; release the keys.
(2)
Enter the digit 9; the LED starts to blink displaying the device code, as in the sample:
If the active code is 1203, the LED first gives 1 blink, to indicate 1; then, after about one second, 2 blinks, to
indicate 2; then 1 long blink, to indicate 0; and finally 3 blinks, to indicate 3.
5.6 40pcs FAV channels
This URC will either scroll through all available channels, or you can program in up to 40 Favorites.
In Favorite Channel Mode, Channel Up/Down scrolls through your Favorites; the 0‐9 buttons work as normal.
Note: When advancing through favorites, let the channel change before pressing the button again.
Channels list setup is available in PC software or in smartphone APP only.
Channel Format
It uses a three or four digit channel entry system. Enter channels as you normally would for your device.
Some devices have the function with ENTER(OK) ended with 1/2/3 digits of channel. Some devices don’t have.
For example, 2‐OK, 2‐3‐OK. 0‐1‐2‐OK. Or 0002, 0023,0012.
Adding “OK” will make the device to turn channel quickly.
Switching Between Favorites and Regular:
(1)
Keep keys
and
pressed down until the LED stays lit; release the keys.
(2)
Enter the four digits 7777; the LED confirms by turning OFF.
Then CH+/CH‐ will transmit channels.
(1)
Keep keys
and
pressed down until the LED stays lit; release the keys.
(2)
Enter the four digits 7776; the LED confirms by turning OFF.
Then CH+/CH‐ will transmit regular code of devices.
Clear channels list.
(1)
Keep keys
and
pressed down until the LED stays lit; release the keys.
(2)
Enter the four digits 7770; the LED confirms by turning OFF.
