OPERATION
NOTE
Å
Å
If the engine fails to start, release the start switch,
then push the start switch again. Pause a few
seconds before the next attempt. Each cranking
should be as short as possible to preserve battery
energy. Do not crank the engine more than 10
seconds on each attempt.
If the battery is discharged, pull the recoil starter to
start the engine.
6. If the engine is started with the starter (choke) in
position 1 , the starter (choke) should be returned to
position 2 to warm up the engine. If the engine is started
with the starter (choke) in position 2 , keep the starter
(choke) in this position to warm up the
engine.
7. Continue warming up the engine until it idles smoothly
and return the starter (choke) to position 3 before riding.
See the
“
Engine Brake-In
”
section prior to operating
engine for the first time.
6 3
-
STARTING A WARM ENGINE
To start a warm engine, refer to the "Starting a cold
engine" section. The choke knob should not be used. The
throttle should be opened slightly.
http://www.mortch.com
Summary of Contents for LX50ATV-2 Kitten
