background image

 

 

Safety First 

The safety of people carrying out any activities associated with the installation and use of the 
X

5c

 X-Ray Inspection System is of primary importance. This chapter is therefore included to 

provide you with general safety guidance. 
The following sections provide more information: 

Safety Awareness

 

All personnel engaged in activities associated with the installation of the system should read 
and comply with the instructions and information contained herein, the statutory 
requirements and regulations, including the provisions of the Health and Safety at Work Act 
(UK), and in line with other international standards. 

EC Declaration of Conformity

 

Provided it is installed, operated, serviced and maintained in accordance with the guidelines 
contained in this User Guide, the X

5c

 X-Ray Inspection System complies with the appropriate 

EU Directives which are listed in this section. A signed EC Declaration of Conformity is 
supplied with each system. 

Safety Warnings

 

A number of general safety warnings appropriate for the use of Loma X-Ray Inspection 
Systems is provided in this section. It is strongly recommended that personnel who are, or will 
be, responsible for installing, maintaining or operating the system described in this guide 
should read and understand these warnings. 

Safety Labels

 

Safety labels are attached or etched in appropriate places to highlight areas of the system 
where caution should be taken to avoid potential hazards. The labels used are listed and 
described in this section. 

Safety Guards

 

For Loma X-Ray Inspection Systems the use of guarding, including covers, panels, curtains 
and other methods is extremely important in order to restrict operators from accessing areas 
of the system that are potentially hazardous when the machine is operating. This section 
provides some guidance. 

Responsibilities and Disclaimer

 

The X

5c

 X-Ray Inspection System warranty provided by Loma Systems is subject to it being 

used and maintained in accordance with a set of guidelines which are included in this 
section. 

Safety Measures

 

Before attempting to use the system a number of basic checks should be carried out to 
ensure that it is in a safe condition and ready to be used. A list of recommended checks is 
included in this section. 

Summary of Contents for X5c








































































Reviews: