OM-LKS-45G 7
Inspect for Shipping Damage
All containers should be examined for damage before and during unloading. The
freight carrier has assumed responsibility for its safe transit and delivery. If the
equipment is received damaged, either apparent or concealed, a claim must be made
with the delivering carrier.
1.
Apparent damage or loss must be noted on the freight bill at the time of
delivery. It must then be signed by the carrier representative (driver). If this is
not done, the carrier may reject the claim. The carrier can supply the necessary
claim forms.
2.
Concealed damage or loss if not apparent until after the equipment is uncrated,
can also be claimed. However, a request for inspection must be made to the
carrier within 15 days. The carrier should arrange an inspection. Be certain to
retain all contents and packaging material.
USE CAUTION whEN UNCRATINg lOlO
EQUIPmENT. mETAl ANd PlASTIC bANdINg
IS UNdER TENSION ANd CAN SNAP bACK
whEN CUT. wOOd PAllETS OR SKIdS CAN
CONTAIN SPlINTERS ANd NAIlS. ShIPPINg
CARTONS CAN CONTAIN lARgE STAPlES.
wEAR glOvES ANd PROTECTIvE EYEwEAR
whEN OPENINg, mOvINg ANd dISPOSINg
OF ShIPPINg CONTAINERS.
Uncrating
1.
Cut strapping or banding that closes the top of the cardboard shipping carton
and secures it to the wood pallet.
2.
Lift carton straight up and off the kettle. Obtain help, if needed.
3.
Remove any Styrofoam blocking or wood bracing that protects unit from
shipping damage.
4.
Cut strapping or banding that secures kettle to the wood pallet or skid.
5.
This kettle weighs over 600 pounds (280 kg). Use material handling equipment
(forklift, pallet jacket, etc.) to lift the kettle off and clear of wood pallet.
ImPORTANT
: Use caution to avoid damage to kettle jacket sheathing, the
tangent drawoff tube, jacket fill assembly or burner assembly parts underneath
the kettle, during the lift and movement. Lift the kettle at the reinforced ring
around the parameter, beneath the kettle outer sheathing.
6.
Pull off any grey/white plastic from stainless steel surfaces. This adhesive-
backed plastic protects surfaces for scratches during fabrication and shipping.
7.
Dispose of cardboard carton, Styrofoam and wood pallet/skid by recycling.
ThIS UNIT IS vERY hEAvY. INSTAllER ShOUld
ObTAIN hElP OR USE mATERIAlS hANdlINg
EQUIPmENT AS NEEdEd TO lIFT ThIS wEIghT
SAFElY.
