LoLo LKS-45G Operator'S Manual Download Page 1

PART NUMBER 156698 Rev. B (08/13)

THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE.  
READ,  UNDERSTAND  AND  FOLLOW  THE  INSTRUCTIONS  AND 
WARNINGS CONTAINED IN THIS MANUAL.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors 

and liquids in the vicinity of this or any other appliance.

POST IN A PROMINENT LOCATION

Instructions to be followed in the event user smells gas.  

This information shall be obtained by consulting your 

local gas supplier.  As a minimum, turn off the gas and 

call your gas company and your authorized service agent.  

Evacuate all personnel from the area.

WARNING

Improper installation, adjustment, alteration, service or 

maintenance can cause property damage, injury or 

death.  Read the installation, operating and maintenance 

instructions thoroughly before installing or servicing this 

equipment. 

NOTIFY CARRIER OF DAMAGE AT ONCE

It is the responsibility of the consignee to inspect the container upon receipt and 

to determine the possibility of any damage, including concealed damage. LoLo 

Commercial Foodservice Equipment suggests that if you are suspicious of dam-

age to make a notation on the delivery receipt. It will be the responsibility of the 

consignee to file a claim with the carrier. We recommend that you do so at once.

Manufacturer’s Service/Questions 877-246-5656

Information contained in this document is known to be current and accurate at the time of 

printing/creation. LoLo Commercial Foodservice Equipment recommends referencing our product 

line website, www.getLoLo.com, for current product information and specifications.

This manual provides information for:

OPERATOR MANUAL

IMPORTANT INFORMATION, KEEP FOR OPERATOR

MODEL: 

LKS-45G

Steam Jacketed Kettle

Summary of Contents for LKS-45G



























Reviews: