6
Cleaning Instructions
Supplies Needed:
Mild dish soap
Clean dish towel or soft brush
Clean wash basin
Drinking-quality water
Clean pot for boiling water
Parts to wash or sanitize:
Breast shield
Milk bottle
Bottle cap
Connector
Valve
1. Disassemble
Separate parts for washing
Caution
Separate and wash all parts that are
exposed to breast milk immediately after
use. This will help to remove breast milk
residue and prevent growth of bacteria.
Only use drinking-quality tap or bottled
water for cleaning.
When cleaning the valves do not use small
objects such as brushes. Be careful not to
puncture.
Disassemble, wash and rinse all parts of
your pump kit that come in contact with
the breast and milk except motor unit.
Note
Take care not to damage parts of the
breast pump kit during cleaning.
Store the dry breast pump kit in a clean
bag/container until next use.
Wash hands thoroughly.
2. Wash
Before first use and after use
Sink
5
minutes
Step 1 –
Rinse all separated parts that
touch the breast and breast
milk in cool water to remove
breast milk residue.
Step 2 –
Soak in warm soapy water for
5 minutes, then wash and rinse.
Step 3 –
Allow parts to air dry. Store
dry parts in a cool place
when not in use.
Stovetop
10
minutes
3. Sanitize
Before first use and once per day
Step 1 – Fill pot with water to cover all
parts. Bring to a boil.
Step 2 – Place parts in boiling water for
10 minutes.
Step 3 – Allow parts to air dry. Store
dry parts in a cool place
when not in use.
EN
Summary of Contents for 280322
Page 171: ......
