1.User guide
1.1 Power supply
Make sure connect the unit to a negative ground 12V-16V D.C power
supply; please do not connect to DC24V truck or bus, otherwise, the unit
will be damaged.
1.2 Notice
A. Do not expose the unit directly under sunlight or install the unit at an
environment of excessive heat or humidity. Also avoid places with too
much dust or the possibility of water splashing.
B. The rearview camera function and navigation function provided only to
be as aid for you driving. We assume no responsibility for any accidents
arising from this. If using the unit will detract your attention, please do
not use it, and also to make sure it will comply with the actual road
conditions and obey all traffic rules and lows.
C. The date provided by the navigation software may not be consistent
with the actual traffic conditions because of accidents, road construction
or other unforeseen developments, so just for reference.
D. Please do not raise the volume level too high and do not wear
headphone when you are driving, otherwise you can not hear the traffic
situation and emergency signals from outside of the car.
E. Please make sure to start the engine when you use this unit, otherwise
the storage battery may run out.
F. This unit is designed to operate through the touch panel. The touch
screen maybe scratched or damaged by harsh or sharp objects.
【
Warming
】
Please do not install and repair this navigation system by yourself. The
person who does not have training in electronic equipment and car
accessories to install or repair this navigation system, it will be possible
to cause dangerous accidents.
【
Safety Statement
】
In some countries it is illegal to watch TV/DVD while driving. For you and
other people’s safety, please don not watch any program or related
operations while driving. The rearview camera function is provided only
as an aid for reversing car. We assume no responsibility for any accidents
arising from this.
1.3 System upgrade
Pease follow the technician’s instruction to upgrade the systems
software.
1.4 Power on
Mare sure the ACC ignition switch has already been turned on,, and then
press the power button on the unit panel.
1.5 Power off
Long-time press the power button on the unit panel, the unit will go into
sleep mode.
【
Notice
】
If you want to turn off the car supply power, please turn off the unit firstly.
1.6 System rest
Click “RESET” when the unit is no response.
The following conditions will cause the unit no response:
The switchover process of screen delay, stagnant cause the frame’s
switchover is not successfully, so play the higher solution video file and
not support file format, causing the unit has not response in a long time,
and click the power supply no use, then you can click “RESET” to restart
the unit and it will return to normal.
1.7 Micro SD card
This system can support the multimedia file play copied in Micro SD card
and the navigation that map data is stored in Micro SD card. Please make
sure you set the GPS navigation path (setting method reference 3.10.1
GPS navigation map path setting), to ensure that you can operation GPS
navigation map program successfully.
【
Notice
】
A
. Do not take out the Micro SD card when the unit is running the
navigation software or media playing to prevent illegal operation, which
the file damaged.
B. Do not press and bend the Micro SD card to avoid the Micro SD card
drop out and hits.
4
3
