3.5.9 Steering wheel control setting
Click setting interface enter into Steering Wheel Control Setting
interface shown the figure as below:
Steering Wheel Control Setting
1. Connect the KEY on original car’s steering wheel to the KEY cable on
the ISO connector. Steering wheel ground to the GND cable of the ISO
connector
2. Click the “Start” icon on the lower right corner, the system will
prompt“Long press key of wheel”, then click the car’s steering wheel
directly, until the system prompt“select function of key”, click the
function key which you needed on the screen, at this point, the button
which you have chosen will increase some extra green sign. The system
will prompt success, then loosen the key of steering wheel control which
you have clicked,click the icon
3. Repeat 2 step to continue setting others function.
“End” in the screen to finish the setting.
3.5.10 Starting Up Logo
Click setting interface icon enter into Video setting interface shown
the figure as below:
Up page
Down page
Confirm function
26
25
