3
OWNER’S MANUAL
Reclining Wheelchair
Usage
(cont’d)
Adjusting the Length of Leg Rests
NOTE: When adjusting length of
footrests, user should be sitting in
wheelchair with feet on the foot
plates.
1. Depress spring button on leg
rest
2. Raise or lower footplate to
desired position that will provide
maximum support of thighs.
3. Confirm spring button locks
into position.
NOTE: Foot plate should not be so
low that it causes uncomfortable
pressure to thighs at front of seat
upholstery.
Elevating the Leg Rests
1. Lift footplate on leg rest
assembly to desired position.
2.
Release leg rest assembly and
it will automatically lock into place.
3. To lower, push out on Ieg rest
lever and lower footplate to desired
position.
Locking the Wheels
Engage both wheel locks before
getting in or out of chair, leaning
forward in chair, or while in an
elevator or wheelchair lift. Locks are
engaged by pushing the handles
completely forward.
Installing Anti-tips
1. Insert the anti-tips with the
wheels curved down towards the
ground/floor until they lock into
place.
2. Press the release buttons on
the lower portion of the anti-tip and
slide it up or down to achieve
proper ground clearance.
3. Make sure both anti-tips are
adjusted to the same setting and
release buttons are fully engaged
before use.
DO NOT ATTEMPT!
Any adjustment to
your product seat can affect the
stability of your product. We highly
recommend that you have a dealer
or licensed technician adjust your
seat height to ensure adjustments
are safe.
ver 2019.10.28E
