Interpreting the Data
UTRED-16 User Guide
38
Temperature Scale
A temperature scale is shown, which adjusts dynamically depending on the settings made
during configuration of the logger with LogTag
®
Analyzer.
Markers
The chart will show marks where the UTRED-16 has been downloaded (
º
) or where an
inspection mark has been placed with the
START
/Mark
or
STOP
/Review
button (
•
). It also
shows Paused marks (
•
) where a button press has prevented readings from being used for
statistics and alarm calculations.
USB Paused Readings
USB loggers cannot take a reading while plugged into a USB port. A gap is shown in the
graph where the UTRED-16 was plugged in at the time it would otherwise have taken a
reading. The list shows
instead of the reading.
Recorded Data Chart
The chart shows a graphical representation of the data during the trip. As part of the
UTRED-16 configuration process you set the parameters that influence how the chart is
presented.
Legend
Shows the symbols for
download marks
,
inspections marks
and
paused marks
if they
appear in the readings.
File Information
This section shows general information about the PDF file, such as generation time, date
and time formats used in the chart and the data list as well as the file name, which is
compiled from information about the data it contains:
LogTag_[serial_number]_[trip number]_[file creation date]_file creation time]_[OK or ALM].pdf
Other files that may be generated have the extensions *.csv and *.ltd.
Logger Information and Configuration
This section shows general information such as serial and model numbers, trip number,
battery status and description. It shows how the logger was started, if a start delay was
active and the interval used for taking readings.
Logger Statistics Overview
This section gives a brief overview of the temperature data collected during the trip. It
shows minimum and maximum values, when these occurred and also shows average,
standard deviation and MKT values.
