During Recording
TREL30-16 User Guide
28
Total Number of Days Statistics Collected
The logger can be configured to show the total number of days for which statistics were
collected. This feature is enabled when configuring the TREL30-16 via LogTag
®
Analyzer
and can be located in the
Advanced Options
dialogue (see
).
When enabled, the total number of days for which statistics were collected are shown on
both the
Recording Display
and the
Stopped Display
.
Figure 4:
TREL30-16 recording, showing ‘18’ days of data has been collected.
Figure 5:
TREL30-16 stopped, showing ‘27’ days of data has been collected.
Note, this is not always the number of days the logger has collected data.
Depending on the sampling interval the logger can hold more than 30 days of
temperature readings, but since the maximum number of days for which statistics
can be collected is 30, the highest number that can be shown here is 30.