23
A
B
7.0 Adjusting the Rotator
7.2 Adjusting the switch
The location of the forks is decided by two inductive switches.
A) Inductive switch on thrust ring
Indicates when the forks are in horizontal position.
When the forks are in horizontal position, the inductive switch has to be
placed right above the plate on the thrust ring in a distance of 2-4 mm.
B) Inductive switch on the teeth of the little toothed wheel
The number of the impulses indicates the angle of the forks.
The distance from the inductive switch to the tooth has to be 2-4 mm.
7.3 Lubrication
Support block
To support the thrust ring, two support blocks
are placed behind the ring.
The blocks have to press on the ring, and the
back of the ring has to be lubricated with grease,
so that the blocks slide smoothly.
Chains
The chains of the Rotator have to be lubricated
with grease twice a year.
2-4 mm
Plate on
thrust ring
Summary of Contents for LOGIFLEX ELFR
Page 1: ...LOGIFLEX ELFR ELFSR ROTATOR...
Page 27: ...27...
