6
The mast lifting capacity and the corresponding centre of
gravity distance are given by the pictogram on the side of the
mast.
The lifting capacity of the mast is the same as the max. lifting
capacity of the product.
Max. lifting capacity is set on the safety valve of the product.
Marking
4.0 Optimum safety
4.1 Avoid overloads
The maximum load must not be exceeded. Remember, that the Logiflex is designed for
evenly distributed load, - goods on pallets etc. If the forks are point-loaded on one
side, there is a risk of bending.
4.2 Avoid offset loads
The load must be evenly distributed. The maximum centre of gravity distance from
the front of the fork mast (given on the truck) must not be exceeded. A greater
distance reduces the level of safety and increases the risk of toppling.
Goods on pallets, etc. must be properly secured, so that they cannot fall off during
transport, when the truck is lifted, or when the truck must remain lifted for a time.
