14
18
6.3 Fork adjustment
Two of the rollers on the fork bracket are mounted on eccentric
pins, so that they can be adjusted. The adjustable rollers are at
the top.
1. Loosen screw (pos. 91) (key width 5 mm).
2. Eccentric pins (pos. 56) (key width 8 mm) can now be turned
to give the necessary fork adjustment.
3. Adjustment must be made on both sides to ensure uniform
loading of the rollers.
6.4 Adjustment of lifting chain
The chains shall be adjusted so that they
lift equally. Shall be
equally tight. The
nuts (pos. 18) are to be adjusted (nut M12,
key width 19 mm).
On straddle versions, the chains are to
keep the forks clear of the floor.
