11
4.5 Fuses - replacement
There are two fuses in the electrical circuit.
- See illustration under point 3.5:
80 amp fuse in main supply
from battery
(location: see A1, point 3.5)
5 amp fuse in control current
circuit
(location: see A2, point 3.5)
Replacement:
Before replacing fuse, disconnect b pole. The old fuse can then be remo-
ved and replaced by a new one of the same size. Do not insert a larger fuse; the
fuse acts as a protector for the pump motor.
Find out why fuses blow!
4.6 Wiring connections
Much operational disturbance is caused by poor connections
in the electrical circuit. Make sure connections are in order.
Check connections regularly for damage at insulating caps or
looseness at plugs, etc.
Verdigris must be removed from lead plugs. Keep all screw/nut
connections tight.