5
3.1 Avoid overloads
The maximum load must not be exceeded. Remember, the stacker is
designed for evenly distributed load, - goods on pallets etc. If the for-
ks are pointloaded on one side there is a risk of bending.
3.2 Avoid offset loads
The load must be evenly distributed. The maximum centre-of-gravity
distance from the front of the fork mast (given on the truck) must not
be exceeded. A greater distance will impair safety and increase the
risk of toppling.
Goods on pallets, etc. must be properly secured so that they cannot
fall off during transport, when the truck is lifted, or when the truck
must remain lifted for a time.
The mast lifting capacity and the corresponding
centre of gravity distance are given by the
pictogram on the side of the mast.
The lifting capacity of the mast is the same as the
max. lifting capacity of the product.
Max. lifting capacity is set on the safety valve in
the product.
Marking
3.0 Optimum safety
