Logitek mixIT Audio Console System/JET67 Manual
28
processed feed where the talent can hear the output of the on-air processing chain if they can’t
listen to air because of profanity delay or HD Radio diversity delay.
In the column for Phones In, set what selections to choose from in the Headphone monitor
selector. Common selections here are program, aux 1-3, air monitor, or an input with a
processed feed where the talent can hear the output of the on-air processing chain if they can’t
listen to air because of profanity delay or HD Radio diversity delay.
In the Talkback Mic column, select the microphone you want sent as talkback to a mix minus
when you hit the talkback button on the console. This is also the audio sent to the caller when
using the Add Mic When Off feature on the mix minus bus. You can only select one source as
the talkback mic.
If you want to mix microphones together to feed to talkback, here are your
options:
Assign one mic to MixA In 1, a second mic to MixA In 2, and a third mic to
MixA In 3. Then set MixerA as the talkback mic.
or
Tick the Pre-fader aux bus box for one of the auxes (such as aux 3) and tick the
box for the same aux bus for Independent Bus Switching. Then set the output
of that aux bus as the talkback mic.
Cue Dir and Mon Mtr are not used on the mixIT.
MixA1 In, MixA2 In, MixA3 In. This is a three channel submixer used to combine three sources.
Assign one source to the MixA1 column, one source to the MixA2 column, and one source to
the MixA3 column. These will be summed together and output as Mixer A.
Route 1, Route 2, Route 3: These are the three router widgets on the right-hand side of the
mixIT-12 or the three router widgets on the mixIT-6. Assign tick marks to the sources you want
available to be routed by these router widgets the same way you assign sources to the console
faders.. Assign the output to either a local or network output.
