background image

Using Your Harmony Remote 

Please read this section before using your Harmony remote for the first time. 

Selecting an Activity 

The Harmony remote gives you dedicated buttons for selecting activities.  

• 

Press any one of the Activity buttons to jump directly to your favorite activities, or press the 

More Activities

 button to display other activities in the LCD. Select the activity you want by 

pressing the adjacent button. 

• 

Since every home has different entertainment devices, your activities will be unique--your 
Harmony will let you choose the activities that are relevant to you. 

• 

As soon as you select an activity, the Harmony remote will send all the appropriate commands 
to your entertainment system so that it is configured for that activity. 
For example, in a 

Watch Television 

Activity,

 

if you have a television and a satellite receiver, 

the Harmony remote will turn on your television, turn on your satellite receiver, and set your 
television to the correct input. 

Switching Between Activities 

To change to a different activity: 

1.   Press any one of the Activity buttons to jump directly to one of your favorite activities, or press 

the 

More Activities

 button to see other activities in the LCD. 

2.   Select the activity you want to switch to by pressing the button next to it, or press 

More 

Activities

Resynchronizing Your Harmony Remote 

From time to time when you select an activity, the activity may not work. This can happen when the 
Harmony remote sends many infrared commands to set up all your devices for an activity, but one or 
more devices are not receiving some commands. The Harmony remote is then "out of sync" with your 
devices (e.g. it thinks one of your devices is on, but it is turned off). Some of the reasons the Harmony 
remote can become "out of sync" with your system are:  

• 

Someone walks between the Harmony remote and your entertainment system while the status 
light is on. 

• 

You point your Harmony remote away from your system while the status light is on. 

• 

There is an object blocking the line-of-sight between your Harmony remote and the system. 

• 

You are very far away from your entertainment system. 

Summary of Contents for HARMONY REMOTE 600 Series


















Reviews: