Installation Steps
a. Connect one end of the provided cable to the USB port on your computer and the other end to
your Harmony remote.
b. The Harmony remote will automatically be detected and USB Human Interface Device drivers
installed. For some versions of Windows you may be prompted to insert your Windows
software CD. Insert your Windows software CD into the computer’s CD-ROM drive when
asked to do so, then follow the online instructions.
c. Log in to the Internet using the account and password provided by your Internet Service
Provider (ISP).
d. Insert the Harmony Client
Software CD into the CD-ROM drive of your computer. After 10
seconds the installation program will automatically start. If the installation does not
automatically start, click the
Start
menu on the taskbar and then click
Run
. Type
D:\Windows\setup.exe
(where D: is the designation of the CD-ROM drive).
e. Follow the online instructions to complete the software installation.
f. If your computer reboots at the end of the software installation process, go to step 1 in
Begin
the Setup Process
.
g. After the software is installed, a web browser window will automatically open and take you to
the
Harmony remote Software
page. Go to step 1 in
Begin the Setup Process
.
Mac Users
The minimum recommended Macintosh system configuration requirements are:
•
Mac with USB plug and play support
•
Mac OS X operating system
•
10 MB free hard drive space
•
Internet connection (e.g. dial-up, cable, LAN)
Installation Steps
a. Insert the Harmony Client Software CD into the CD-ROM drive of your computer.
b. After a few seconds, a CD-ROM icon will appear on your desktop.
c. Double-click the CD-ROM icon to view the contents of the CD-ROM.
d. Double-click
the
Mac
folder and then click the
Harmony remote Software.mpkg
icon.
e. Follow the online instructions to complete the software installation.
f. After the software installation completes, the Harmony remote application will automatically
start and the Harmony icon will be displayed in the Dock. If the application does not
automatically start, then use
Finder
to open the
Applications
folder and double-click the
Harmony remote
application.
g. Click
Harmony Remote
from the menu bar and then click
Preferences
. In the
Preferences
dialog box, set the
Download Folder
to match the downloads folder for your Safari web
browser. To check the Downloads folder for Safari, open the web browser and select
Safari/Preferences/General/Save.
h. In the Harmony remote
Preferences
dialog box, ensure the
Watch download folder
and
Cleanup downloaded files
are selected.
Note:
If you have not set your download directory
previously, you will not be able to select the
Watch download folder
option.
