manualshive.com logo in svg

Logik LIW714W20, Instruction & Installation Manual, Page: 10 / 33

Share
Download
Logik LIW714W20 Instruction & Installation Manual Download Page 10

INSTALLATION

6

Installation

Installing Your Washing Machine

Please read and follow the instructions carefully.
•  In addition to the instructions mentioned here, special regulations of the relevant 

water and power supply companies may apply. If in doubt, have the washing machine 

connected by a qualified technician.

•  The washing machine is heavy - caution when lifting it. Do not lift by projecting 

components (e.g. washing machine door).

•  Warning: Frozen hoses may tear/burst. Do not install washing machine in outdoor areas or 

where there is a risk of frost.

•  Lay hoses and cables in such a way that there is no risk of tripping over them.

Choosing the Right Location for Your Washing Machine

•  Make sure there’s enough space for your washing machine.
•  Install your washing machine on a flat, stable surface to avoid excessive vibrations and 

noise.

•  Don’t install your washing machine in direct sunlight or in a place where temperatures can 

reach freezing.

Ò

Ò

Ò

Sloping 

surface

Unstable

Bumpy 

surface

•  The ventilation openings in the base of the washing machine must not be obstructed by 

carpet.

•  Start by tilting the washing machine backwards.
•  One person should stand behind it, holding the rear of the top panel. The other person 

should grip the bottom feet at the front.

•  Check that you have all the required accessories for installation.
•  We recommend that you entrust the installation of the washing machine to a qualified 

technician.

x

 Sloping 

 surface

x

 Unstable

x

 Bumpy 

surface

Two or more people are required to move the washing machine.

An additional space (approximately 120mm) is required at the rear of the machine. 

This is to allow enough space for the water hose and drain hose connections.

LIW714W20_IB_Final200729.indd   6

LIW714W20_IB_Final200729.indd   6

29/7/2020   5:33 PM

29/7/2020   5:33 PM

Summary of Contents for LIW714W20


































Reviews:

No comments