background image

24

There’s not much foam.

•  This can happen if you’ve put powder detergent directly into 

the drum – you must put it in the detergent drawer.

•  The amount of foam can vary, depending on the temperature, 

level and softness of your water.

•  You may not be using enough detergent.
•  You may be using a reduced-foam type of detergent.
•  Heavily soiled laundry can reduce the amount of foam.
•  Larger loads of laundry can also reduce the amount of foam.

There’s a lot of foam.

•  The amount of foam can vary depending on the temperature, 

level and softness of your water.

•  You may have used too much detergent.
•  The type of detergent you use could cause excessive foam.

Fabric softener overflows. •  You may have exceeded the MAX level in the softener drawer.

•  You may have spilt the liquid by closing the softener drawer 

too sharply.

There’s a residue of 

powder detergent at the 

end of the wash.

This can happen if you’ve put powder detergent directly into the 

drum – you must put it in the detergent drawer.

There’s an unusual noise 

or vibration.

•  Check that there’s nothing metal in the drum.
•  Make sure the transit bolts used in transportation have been 

removed.

•  Check that the washing machine feet have been levelled 

correctly.

•  Check that the washing machine is on a flat, stable surface.

There’s a noise when the 

water drains away.

This is normal, it’s the pump starting and stopping.

The electricity supply cuts 

out while the washing 

machine is on.

The washing machine will stop (do not open the door if the 

machine is full of water). When the power comes back on, the 

washing machine will continue the programme. 

The water supply is 

disrupted.

When the water comes back on, it may be impure at first.

You’ll need to disconnect the water-supply hose and drain 

any impure water through the tap before using your washing 

machine again. Remember to re-connect the water supply hose 

first.

Excessive foam in the 

detergent drawer.

Press the Start/Pause button. Change the programme to the 

Rinse selection to manually rinse and drain the drum. Use the 

correct amount of detergent next time.

LIW714W20_IB_Final200729.indd   24

LIW714W20_IB_Final200729.indd   24

29/7/2020   5:33 PM

29/7/2020   5:33 PM

Summary of Contents for LIW714W20


































Reviews: