Logik LHDR15, Instruction Manual

Page: 14 / 24

14
Activating/Deactivating the Alarm Function
These changes must be made with the unit in standby mode.
1. To activate or deactivate the alarm function, press the ALARM/SNOOZE button, then
press the
or buttons to select “Alarm On” or “Alarm Off”.
2. Press the SELECT button to confirm.
If you have activated the alarm function and the wake-up mode is DAB or FM,
make sure that the volume is at a sufficient level for you to hear.
Turning the Alarm Off When it Sounds
• When the alarm sounds press the STANDBY button to switch the alarm off.
Snooze Function (Mains Operation Only)
When the alarm has been triggered, press the
ALARM/SNOOZE button to temporarily switch off the
alarm. Press the ALARM/SNOOZE button to select a
time 5 - 10 - 15 - 30 minutes. The display will show
“Zz” to indicate that snooze is on and the display will
show the minutes remaining before the alarm sounds again.
If one alarm goes off while the other is in snooze mode, snooze mode will
be cancelled.
Sleep Function
This function allows you to program the unit to switch off by itself after a set period of time.
1. Press and hold the MENU/INFO button to enter the menu.
2. Press the
or button until “System” shows on the display.
3. Press SELECT to confirm.
4. Press the
or button until “Sleep” shows on the display.
5. Press SELECT to confirm.
6. Press the
or button to select from Sleep off/10/20/30/60/70/80/90 minutes.
7. Press SELECT to confirm.
8. When the sleep timer is zero, the unit will switch to STANDBY mode.
LHDR15_IB.indd 14 24/02/2016 08:30