20
Safety Warnings
•
Read all the instructions carefully
before using the unit and keep
them for future reference.
•
Retain the manual. If you pass the
unit onto a third party make sure to
include this manual.
•
Check that the voltage marked on
the rating label matches your mains
voltage.
Damage
•
Please inspect the unit for damage
after unpacking.
•
Do not continue to operate the
unit if you are in any doubt about it
working normally, or if it is damaged
in any way - switch off, withdraw the
mains plug and consult your dealer.
Location of Unit
•
The unit must be placed on a flat
stable surface and should not be
subjected to vibrations.
•
Do not place the unit on sloped or
unstable surfaces as the unit may
fall off or tip over.
•
The mains socket must be located
near the unit and should be easily
accessible.
•
This unit is designed for indoor use
only.
Temperature
•
Avoid extreme degrees of
temperature, either hot or cold.
Place the unit well away from heat
sources such as radiators or gas/
electric fires.
•
Avoid exposure to direct sunlight
and other sources of heat.
Naked Flames
•
Never place any type of candle or
naked flame on the top of or near
the unit.
Moisture
•
To reduce the risk of fire, electric
shock or product damage, do not
expose this unit to rain, moisture,
dripping or splashing. No objects
filled with liquids, such as vases,
should be placed on the unit.
•
If you spill any liquid into the unit, it
can cause serious damage. Switch
it off at the mains immediately.
Withdraw the mains plug and
consult your dealer.
Ventilation
•
To prevent the risk of electric shock
or fire hazard due to overheating,
ensure that curtains and other
materials do not obstruct the
ventilation vents.
•
Do not install or place this unit in
a bookcase, built-in cabinet or in
another confined space. Ensure the
unit is well ventilated.
Safety
•
Always disconnect the unit from the
mains supply before connecting/
disconnecting other devices or
moving the unit.
•
Unplug the unit from the mains
socket during a lightning storm.
LCRDAB10_IB_final111001_Zell.indd 20
01/11/2011 12:22 PM