10
Checking the Alarm
1. To view the alarm time set, press the
DISPLAY
button until
ALARM 1
or
ALARM 2
status is displayed.
2. You can see whether
ALARM 1
or
ALARM 2
is set as the
1
or
2
will illuminate
on the top left corner of the display.
Snooze Function
When the alarm sounds, the snooze indicator “
SNOOZE
” will appear in the display.
You can have two options.
1. Press the
STANDBY
button to turn off the alarm.
2. Press the
SNOOZE/MUTE
button when the alarm sounds. The snooze
indicator “
SNOOZE
” will illuminate in the display. The alarm will go off and
will then sound again in approximately 5 minutes.
3. Use the
VOL+
and
VOL–
buttons to change the volume of the radio or buzzer.
Setting the Sleep Time
Press the
SLEEP
button to set the sleep time. You can select from 5 options,
Sleep
Off
,
Sleep 90 mins
,
Sleep 60 mins
,
Sleep 30 mins
,
Sleep 10 mins
by pressing it
repeatedly. The selection you make will be automatically confirmed after 3 seconds.
System Reset
There may be times when you need to reset your unit back to the factory settings.
If you experience reception problems you may want to reset and try again. If you
move the unit to another part of the country and pick up the local and national
DAB stations in that area, your previously tuned channels may no longer be
available.
You can reset your radio by the following steps.
1. Press and hold down the
DISPLAY
button until the display changes.
2. Press the
DISPLAY
button again to scroll through the options until
System
Reset
appears on the screen.
3. Press the
SELECT
button to confirm the system reset.
After the system reset, all the tuned stations, DAB & FM preset
stations and alarm settings will be erased.
LCRDAB10_IB_final111001_Zell.indd 10
01/11/2011 12:22 PM
