GB-6
Bef
or
e U
se
Oper
ation
Specifica
tion
Installa
tion
Saf
et
y
W
ar
nings
Cleaning and M
ain
tenanc
e
First Time Use of the Oven
Unpack the oven. Remove any insert cards or plastic bags. Use a damp cloth to carefully wipe the interior
and exterior of the oven. Clean all the detachable parts in hot, soapy water before using.
Heat the oven on maximum for 30mins. There may be a little smoke and odour upon initial start up (for
about 15mins). This is normal. It is due to the protective substance on the heating elements which protects
them from the effects of corrosion during shipping from the factory.
Oven On and Off
In order to switch on the oven you need to:
1. Set required working conditions of the oven, its temperature and a mode of heating.
2. Set the
Function Control
to the required position, turning it right.
3. Press the
Manual
button to start the oven. The blue lamp above the button will illuminate, and after
5 seconds the
RED RUN
lamp will light to show the oven is operating.
During use the appliance become hot. Care should be taken to avoid touching
heating elements inside the oven.
Natural Convection Oven
The oven can be warmed up using the bottom and top heaters, as well as the
grill. Operation of the oven is controlled by the oven
Function Control
— to
set a required function you should press in to release the
Function Control
and then turn to the selected position.
As well as the temperature regulator
Temperature Control
— to set a
required temperature you should press in to release the
Temperature Control
and then turn to the selected position.
The oven can be switched off by setting both of these controls to the off
position " " / "0".
˚C
Function Control
Temperature Control
Setting the Clock
1. Press the button two times then press the or button to set the hour, press the button again
and then press the or button to set the minutes.
2. Wait for 5 seconds or press the button again.
