GB-14
Bef
or
e U
se
Oper
ation
Specifica
tion
Installa
tion
Saf
et
y
W
ar
nings
Cleaning and M
ain
tenanc
e
Installation
Before using the appliance, please read the instruction manual carefully.
By following these instructions carefully you will be able to avoid any problems in using the appliance.
It is important to keep the instruction manual and store it in a safe place so that it can be consulted at any
time.
It is necessary to follow the instructions in the manual carefully in order to avoid possible accidents.
Use as Competent Person or Qualified Electrician
•
This unit must be installed in accordance with the latest local building and wiring regulations.
•
Refer to data plate for rating information. The data plate is positioned behind the bottom of the oven
door. The circuit diagram is positioned on the rear panel of the appliance.
•
An isolating switch must be provided near the appliance in an accessible position.
•
Wiring should be protected against mechanical failure.
•
A means of disconnection with a contact separation of at least 3mm must be supplied in the fixed
wiring.
•
This appliance must be properly earthed.
•
Do not lift the appliance by the door handles.
•
Prepare the cupboard opening to match your oven measurements. (See diagrams)
•
Slide appliance into the cupboard, ensuring that the mains cable does not kink.
•
To prevent tipping, secure your oven into the cupboard by fastening with the screws supplied.
•
Where the appliance is built into a cabinet, the cabinet must be capable of withstanding 100°C.
Installation into low temperature tolerant cabinetry (e.g. Vinyl coated) may result in deterioration of
the low temperature coating by discolouring or bubbling.
•
The unit panels next to the cooker must be heat resistant. In the case of veneered wood units, glues
must be resistant to a temperature of 100°C.
•
We cannot accept responsibility for damage caused by installation into low temperature tolerant
cabinets.
•
After installation, test and ensure that the appliance operates correctly before handing it over to the
customer.
The oven is intended for household use only.
The manufacturer reserves the right to introduce changes which do not affect
the operation of the appliance.