11
Connecting to a Digital TV
1. Ensure your TV and any other equipment you are connecting to are switched off.
2. Connect one end of the RF coaxial cable (not supplied) to the aerial socket on the wall
and the other end to the RF IN socket on the rear panel of the unit .
3. Connect another RF coaxial cable (not supplied) to the RF OUT socket on the rear panel
of the unit and the other end to your TV.
4. Connect one end of the SCART cable (not supplied) to the TV socket on the rear panel of
the unit and the other end to the SCART socket on your TV.
Aerial
To aerial wall
socket
To RF IN socket
To SCART socket
RF Coaxial Cable
(not included)
RF Coaxial Cable
(not included)
SCART Cable
(not included)
To Mains Socket
Mains Adapter Cable
(included)
Digital TV
The set top box must be switched on to see a picture on your TV.
If the set top box is switched into STANDBY the aerial signal will not feed
through your set top box into your TV. The words ‘NO SIGNAL’ will be
displayed on your TV. Switch the set top box on to view your TV.
L5SSTB13_IB.indd 11
28/08/2014 11:53
