Logik L55DAB10, Instruction Manual

Page: 16 / 24

16
Programme Type
This describes the “Style” or “genre” of music that is
being broadcast e.g. “Rock” or “Classical”.
Time/Date
The broadcaster (Radio station) provides clock and
date information automatically so there’s no need
to manually set this information. In the unlikely
event that the broadcaster does not transmit any
clock information; the display will show <Time/
Date>.
Radio Text
As with DAB, the broadcaster can include a
scrolling text that displays information about the
current program. If Radio text information is not
available, then the display will show <Radio Text>.
Frequency
This shows the frequency of the current station.
Programme Type
Time/Date
Radio Text
Frequency
Display Backlight
There are four backlight levels for you to select from in AC mode. During AC standby and DC
on mode, the backlight will be turned on to full brightness for 5 seconds on every key press.
There is no backlight setting in DC operation.
To set the backlight, repeatedly press the BACKLIGHT/SNOOZE button and the brightness of
the display will change in the below sequence on every press:
Backlight off > Backlight 01 > Backlight 02 > Backlight 03 > Backlight off >……
Recalling a Stored Station
1. Once you have saved a station to one of the preset buttons, you can recall it by pressing
the PRESETS button.
2. Turn the VOLUME/SELECT control to select your desired preset station number.
3. Press the TUNE/SELECT button to confirm the selection.
4. If you choose a preset that hasn’t been allocated a station, “Empty preset #“ will be
displayed.
FM Display Modes
Every time you press the INFO button, the display will cycle through the following display
modes: Programme Type, Signal Strength, Time/Date, Channel Frequency, Audio Mode,
Radio Text.
The display backlight level is defaulted to “Backlight 01” in AC standby
and “Backlight 03” during operation. This is resumed only when the
factory reset has taken place.
L55DAB10_IB_110810_Zell.indd 16 10/08/2011 10:44 AM