Logik L55DAB10, Instruction Manual

Page: 10 / 24

10
Activating the Alarm Function
1. To activate the alarm function, repeatedly press the ALARM1 or ALARM2 button, the
alarm wake-up modes will be displayed and change in the below sequence on every
press:
2. When the display shows your desired alarm wake-up mode, release the button, the alarm
function is now activated and an alarm icon will be displayed.
3. When the alarm time arrives, the selected wake-up mode will be on and the alarm icon in
the display will flash to indicate the alarm is triggered. To stop the alarm sooner, press the
STANDBY button.
4. To check the alarm status, press the ALARM1 or ALARM2 button. The alarm status will
show on the display.
Automatic Alarm Repeat
The alarm will automatically repeat each day at the selected time as long as the alarm icon
is displayed. To cancel this function, repeatedly press the ALARM1 or ALARM2 button until
“Alarm Off” shows on the display.
Snooze Function (AC Operation Only)
When the alarm has triggered, press the SNOOZE button to temporarily switch off the alarm
for 5 minutes. The display will show “Zz” to indicate that snooze is on. Snooze function will
continue for 1 hour from the set alarm time. If alarm 2 is due to go off within
1 hour of alarm 1, it will not activate until alarm 1 has been switched off.
Alarm Off DAB Preset # FM Preset # Buzzer Tone #
If you have activated the alarm function and the wake-up
mode is DAB or FM, make sure that the volume is at a sufficient
level for you to hear.
L55DAB10_IB_110810_Zell.indd 10 10/08/2011 10:44 AM