19
FM Operation
Auto Scan and Save Preset Station
1. Press the SOURCE Button repeatedly on the unit or on the remote control to select FM
mode.
2. Press the SCAN Button on the remote control to activate automatic programming. All
available stations are programmed in the order of waveband reception strength.
• The first programed radio station is played automatically.
Tune to a Preset Radio Station
• Press the / Button to select a preset number that you want. Press the /OK Button
to confirm.
Tuning in a Station
Tune in radio stations automatically
• Press the / PAIR Button on the unit or press and hold the
/
Button, the
frequency changes down or up automatically until a station is found.
The search may not stop at a station with a very weak signal.
Tune in radio stations manually
• Press the
/
Button repeatedly until you find the station you want.
Presetting Stations Manually
You can preset up to 20 FM stations.
1. Tune in the desired station, then press the PROG Button.
2. Press the / Button to select the preset number.
3. Press the PROG Button to store the station.
4. Repeat above steps 1 to 3 for each station you want to store in memory with a preset
number.
• If reception is still poor, try to adjust the position of the aerial or try to move
the unit to another location while the unit is in FM or DAB mode.
• The unit will automatically synchronise with the clock of the radio station every
hour. After synchronisation, press the Button on the unit or remote control
and a time clock will show on the display. If the unit is idle for a further 90
seconds, the unit will enter Standby mode.
13C
234.208 MHz
13D
235.776 MHz
13E
237.488 MHz
13F
239.200 MHz
