14
General Operation
When you first connect the unit to the mains socket, the unit will be in Standby mode. The
POWER indicator will light up red.
• Press to switch the unit on. The display will show a greeting message HELLO and
then the last used mode.
• Press to switch the unit back to Standby mode. The display will show STANDBY and
then turn off. The POWER indicator will light up red.
• Disconnect the mains plug from the mains socket if you want to switch the unit off
completely.
The eco-friendly technology will switch this device to Standby mode
automatically when the input device volume is too low or muted for 15 minutes.
The device can be reactivated by pressing Standby button and turning up the
input device volume. Except for Optical mode, the eco-friendly control will switch
the device to standby mode automatically when there is no input signal for 15
minutes.
Selecting Modes
Press SOURCE repeatedly to switch between DAB, FM, AUX, BT, MP3 LINK and OPTICAL
mode.
Adjusting the Volume
• Press VOL +/– to adjust the volume.
• If you wish to turn the sound off, press MUTE on the remote control. Press MUTE again
or press VOL +/- to resume normal listening.
Selecting the Equaliser
Press EQ on the remote control repeatedly to select a desired music mode (DEFAULT,
MOVIE, MUSIC, TV).
• When AUX or OPTICAL mode is selected, the equaliser will be set to MOVIE.
• When DAB, FM, BT or MP3 LINK mode is selected, the equaliser will be set to MUSIC.
Adjusting the Brightness
Press DIM on the remote control repeatedly to select brightness level.
