15
DAB Operation
Auto scan
The auto scan will search for the entire DAB Band III channels. When DAB mode is selected,
the unit will start an auto scan. You may also follow the steps below to run a auto scan
manually:
1. While in DAB mode, press the / PAIR Button on the unit or the SCAN Button on the
remote control to perform a full scan.
OR
Press MENU on the remote control to enter the DAB Menu. Press
/
to select
“FULL SCAN”, and then press /OK on the remote control to confirm.
2. The display will show “Scan …”. This may take a few minutes, depending on the number
of stations found.
After the scan has finished, the first alphanumerically found station will be selected and
all the stations that have been found will be stored automatically. To explore the found
stations, press
/
and then /OK on the remote control to confirm.
Running a full scan will clear all the DAB stations previously found.
Secondary Services
You may see a “>” symbol after the name of the primary station whilst exploring the found
stations by pressing
/
. This indicates that there are secondary services available to
that station. These secondary services contain extra services that are related to the primary
station. e.g. a sports station may want to add extra commentaries. The secondary services
are inserted directly after the primary station in the station list.
To select the secondary station, press
/
until you find the secondary service and
press /OK on the remote control to confirm. When the secondary service ends, the unit
will automatically switch back to the primary station.
Manual Tuning
You can also manually tune the receiver. This can help when aligning your aerial or when
adding stations that were missed while auto tuning.
1. Press MENU and then
/
on the remote control to select “MANUAL”. Press /OK
on the remote control to confirm.
2. Press
/
on the remote control to scroll through the DAB channel frequency.
3. After your desired channel frequency is selected, press /OK on the remote control to
confirm. The display will now show the frequency signal strength bar.
4. If a signal is detected, the station will be saved in the station list.
