Logik L160STB11, Instruction Manual

Page: 33 / 44

33
3. In the TV menu, press the buttons to choose
the options and then press the buttons to
adjust the settings.
TV
1. Press the MENU button and then press the
buttons to select Settings. Press the button or
the OK button to confirm.
2. Press the buttons to select TV and then press
the OK button to confirm.
OK BACK
Channels
Install
Settings
MENU Sat, 12 Sep 19:21
Language
TV
Time
Parental Lock
Updates
OK: Save BACK
Brightness
Contrast
Aspect ratio
Video output
Digital audio
Auto standby
45%
40%
4:3 pan scan
CVBS
Compressed
3 hours
TV Sat, 12 Sep 19:23
Brightness
Allows you to increase or decrease the amount of white in the picture.
Contrast Allows you to adjust the difference between light and dark levels in the picture.
Aspect Ratio
Allows you to select 4:3 Panscan / 4:3 Letterbox / 16:9.
4:3 Pan Scan
Widescreen picture shown in the full screen with some part cut.
4:3 Letter box
Widescreen picture shown in the full screen with black bars on
the top and bottom of the screen.
16:9 Widescreen picture shown in the full screen.
Video Output Allows you to select from CVBS / RGB from the SCART socket.
Digital Audio Allows you to select from Off / Compressed / PCM
Auto
Standby
Allows you to select from 3 hours / 5 hours / 8 hours / Off.
The unit will automatically switch to
standby mode 3 hours (default) after the
last time the remote control was used. A
reminder screen will pop up for 2 minutes
and count down before the unit switches
to standby mode.
If you want to operate the unit for a long period of time, set the auto standby
function to Off. To save energy you should always turn the auto standby function
back to “3 hours”.
4. Press the OK or BACK button on the remote
control to confirm and return to the previous
menu.
5. Press the EXIT button on the remote control to
exit the menu.
Your receiver will automatically switch to
standby in 2 : 00
Press any key to continue viewing
L160_250STB11_IB_final110705.indd 33 05/07/2011 4:29 PM